Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6
DI...
Working safely
Error messages should only be acknowledged once the cause of the error is
removed and no further danger exists.
The device complies with the safety requirements of DIN EN 61010 Part 1
(VDE 0411 Part 1). The power pack is designed for protection class I. The
interrogator itself is only ever supplied with an extra−low voltage from a limited
energy circuit, there are no voltages that could be a contact hazard.
Conversions and modifications
The interrogator must not be modified from the design or safety engineering
point of view except with our express agreement. Any modification shall
exclude all liability on our part for any damage resulting therefrom.
In particular, any repair or soldering work on motherboards is prohibited. When
exchanging complete modules, use only original parts from HBM.
Qualified personnel
This device is only to be installed and used by qualified personnel strictly in
accordance with the specifications and with the safety rules and regulations
listed here. It is also essential to comply with the legal and safety requirements
for the application concerned during use. The same applies to the use of
accessories.
Qualified personnel means persons entrusted with the siting, mounting,
commissioning and operation of the product, who possess the appropriate
qualifications for their function.
WARNING
The interrogator is considert Class A equipment. When used in residual
business and industrial application it may cause electromagnetic interference.
In these cases the user may be required to take appropriate measures.
HBM
A2301-1.2 en/de
Werbung
Inhaltsverzeichnis
