Geberit Basic Instandhaltungsanleitung Seite 35

Make settings with the Geberit App
After connecting a Geberit app to the device, the following functions and settings are available:
• Operation:
– Flushing: Activating a flush
– Cleaning: Suppressing the flush actuation for a few minutes
• Setting parameters and functions → See the 'Settings' table
• Displaying device information such as the battery capacity or firmware version → See the 'Information'
table
• Displaying statistical values for use → See the 'Information' table
• Exporting device information and statistical values
• Displaying error messages
• Carrying out firmware updates
• Saving and transferring presettings
The settings can be saved in the Geberit App as presettings and transferred to other devices.
Table 3: Settings
Menu item Description
Operation
Actuate flush
[Flush]
Actuates a flush.
Activate cleaning mode
The flush actuation is suppressed
[Cleaning]
for the [cleaning time].
[Cleaning time]
Device settings
Block flush
The flush actuation is blocked for
[Block flush]
10 hours. The red LED in the
command sensor window flashes twice every
6 seconds. The function switches
off automatically after 10 hours.
Empty pipe
The solenoid valve is opened for
30 minutes to empty the pipe. The
[Empty pipe]
red LED in the sensor window
command
flashes twice every 6 seconds.
The function switches off automat-
ically after 30 minutes.
18014405597129227 © 05-2022
971.384.00.0(00)
Application
• To run a function test
on the solenoid valve
• To flush out the urinal
ceramic (e.g. when
setting the flush time)
• To clean the cover
plate and urinal
ceramic without the
water running
–
• To carry out
maintenance work
• To carry out
maintenance work
• To carry out winter
emptying
Area Factory
setting
On/Off –
On/Off –
1–20 min 10 min
On/Off –
On/Off –
35
EN