Final Preparations; Removing Transport Locks; Operating The Toggle Switches 9 And 15 Gb; Setting The Time - hanseatic 65M90E0-E11A99G Gebrauchsanleitung

Preparation

Final preparations

Removing transport locks

1. Remove any polystyrene, cardboard and
plastic safety parts from the oven and sides
of the baking trays.
2. Remove all blue protective films.
Operating the toggle switches
9 and 15
The toggle switches 9 and 15 are retractable.
When pushed in they are level with the control
panel.
To operate the toggle switches,
• tap the middle of the toggle switch. To hide it
again, push it in.

Setting the time

Set the clock:
– if the oven has been newly connected;
– after a power failure.
If the oven has been newly connected, or after a
power failure, the display will show the following:
How to set the clock:
11
3. Press the 11 button.
GB-14
0:00
0:00
Built-in oven 65M90E0-E11A99G
0:00
The first on the clock will begin to flash.
0
0:00
4. Set the hour indicator by turning the toggle
switch 15. Notice: It is always a 24-hour
clock and cannot be changed to a 12-hour
clock.
5. Press the 11 button again.
13:00
The last two zeros on the clock will begin
00
to flash.
6. Set the minute indicator by turning the toggle
switch 15.
13:22
11
7. Press the 11 button again. The two dots
between the two display blocks will start to
flash; the time has now been set.
Notes:
– After a power failure you will need to reset
the time.
– You will also need to change the time from
CET to "summertime" and vice versa manu-
ally.
15