2. Fold the clips on both sides all the way for-
ward. Use a screwdriver if necessary.
3. Close the oven door only as far as the
clips allow easily.
4. Lightly lift and guide the door forward out
of its hinges.
Replacing the oven door on its hinges
1. Hold the oven door at an angle using both
hands.
2. Hook the hinges into the holes in the side
panels.
3. Open the oven door completely.
4. Fold the clips on both sides all the way
back again.
5. Close the door carefully. The door must sit
flush when closed. If the door does not sit
flush when closed or if there is a cracking
sound when closing it, the oven door is not
hung properly.
Cleaning and servicing the oven
6. Correct the position of the hinges and
clips, if necessary, until the door opens
and closes smoothly again.
Cleaning the glass panes
The oven door contains three glass panels
that should occasionally be cleaned on both
sides.
1. Take the oven door off its hinges (see
above „Removing the oven door from its
hinges").
2. To remove the cover from the top of the
oven door, push the bolts in lightly on both
sides.
3. Remove the panes of glass with care and
retain the rubber holders with care.
4. Clean all the panes with warm soapy wa-
ter and dry them thoroughly.
Page EN-21