Important Safeguards For All Electrical Appliances; Technical Specifications; Operating; Before First Use - Gastroback Design Fleischwolf Advanced Bedienungsanleitung

IMPORTANT SAFEGUARDS FOR ALL ELECTRICAL APPLIANCES

• Always unwind the power cord completely before installing the appli-
ance.
• Place the appliance close to a power outlet and connect it directly wit-
hout using any extension cords to avoid additional risks of injury through
fire or voltage.
• Only install the appliance in proper form secure grounding receptacle with ade-
quate electric power supply (alternating current; 220 - 240 V ~, 50 - 60 Hz)
and ground fault circuit interrupter. You should also install a fuse with a release
current of maximum 30mA. If necessary ask your electrician for help.
• Never pull, rip, bend, clamp, squish or knot the power cord. Pay attenti-
on to the power cord not hanging of the table. Attend to nobody getting
caught in loops of the power cord or pulling the appliance of the work
space. When pulling the plug always catch hold of the enclosure of the
plug.
36

TECHNICAL SPECIFICATIONS

Model:
Power supply:
Power consumption:
Length of power cord:
Weight:
Dimensions (width x depth x height):
Certification:

OPERATING

BEFORE FIRST USE

Rinse all the parts of the appliance with water that come into contact with food and cle-
an them with dishwashing detergent. Operate according to the instructions ›Care and
cleaning‹.

ASSEMBLING THE APPLIANCE

WARNING: The work space has to be easily accessible, solid, even, dry and of
sufficient size. The mincer should only be set up on a firm level work surface. Never
place the appliance close to the edge of the working area. Ensure that the power sup-
ply cable does not hang down from the work surface as it could be easily pulled, parti-
cularly by small children, thereby causing serious accidents. DO NOT put any cloth or
napkins underneath the appliance to avoid endangering by fire and electric shocks.
NEVER place the appliance on paper towels or uneven working areas. The air has to
able to circulate.
IMPORTANT: Always ensure that the plug is not connected to the power outlet before
assembling or disassembling the appliance. Place the mincer on a flat, dry surface such
as a bench top.
Art. No. 41409 Design Mincer Advanced
220 - 240 V ~, 50 - 60 Hz
350 W, 1,3 Nm
approx. 140 cm
approx. 8 kg
approx. 325 x 223 x 362 mm
37