IMPORTANT SAFEGUARDS FOR ALL ELECTRICAL APPLIANCES
• Always uncoil the line cord completely before installing the appliance.
• Place the appliance close to a power point and connect it directly wit-
hout using any extension cords to avoid additional risks of injury through
fire or voltage.
• Only install the appliance in proper form secure grounding receptacle
with adequate electric power supply (alternating current; 230/240 V,
50 Hz) and ground fault circuit interrupter. You should also install a fuse
with a release current of maximum 30mA. If necessary ask your electri-
cian for help.
• Never pull, rip, bend, clamp, squish or knot the line cord. Pay attention to
the line cord not hanging of the table. Attend to nobody getting caught in
loops of the line cord or pulling the appliance of the work space. When
pulling the plug always catch hold of the enclosure of the plug.
TECHNICAL SPECIFICATIONS
Model:
Power supply:
Power consumption:
Weight:
Dimensions:
Certification:
34
Art. No. 41406 Design Mincer Electronic Pro
230 V AC, 50 Hz
500 W
approx. 4,38 kg
approx. 350 x 188 x 385 mm
(width x depth x height)