Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
26
• There are holes on the underside or sides of the hob where you can fix the tension
clamps. There are three holes in each of the tension clamps.
• Use a screwdriver to tighten the tension clamps evenly. Start in the centre and
continue diagonally until the built-in rim sits firmly on the work surface.
• You should place the tension clamps below the hob. Use the screws included in the
scope of delivery to fix the tension clamps. These screws must be tightened securely.
Depending on the model, there are 4 -5 tension clamps for the hotplate.
Screw-
hole
Screw
Tension clamp
Base
Screw
hole
Screw
Tension
clamp
Werbung
Inhaltsverzeichnis
