Installation - STIEBEL ELTRON DHE 21 SLi Gebrauchs- Und Montageanleitung

INSTALLATION

Installation
10. Installation
This chapter describes installation in accordance with the factory
settings.
For further installation options, see chapter "Installation alter-
natives".
f Open the appliance. f
f Remove the back panel by pressing the two locking hooks f
and pulling the lower part of the back panel towards the
front.
f Mark out the holes for drilling with the installation template. f
If the appliance is to be installed with water connections for
finished walls, also mark out the fixing hole in the lower part
of the template.
f Drill the holes and secure the mounting bracket with f
2 screws and 2 rawl plugs (screws and rawl plugs are not
part of the standard delivery).
Note
If you are installing the appliance with flexible water con-
nections, secure the back panel with a screw.
f Fit the mounting bracket. f
30 |DHE SLi
160
30
1 Installation aid
f Prepare the power cable. f
Making the water connection
Material damage
!
Carry out all water connection and installation work in
accordance with regulations.
f Seal and insert the twin connectors. f
2
1 2
3
5 4
1 DHW with tee
2 Gasket
3 Cold water with cross-piece
4 Strainer
5 Profile washer
f Fit the water connections. f
Material damage
!
The strainer must be fitted for the appliance to function.
f When replacing the appliance, check that the strain- f
er is present.
1
www.stiebel-eltron.com