Assembly - AsViva SBT1 Betriebsanleitung

ASSEMBLY

ATTACHING THE TRAINER
1. Place the trainer on a level surface and ensure that there are no obstacles or dangerous
objects nearby.
2. Mounting the SBT1 is easier when the body of the unit is on its side.
NOTE: A torsion wrench is suitable for mounting.
3. Install the base and tighten the screws to ensure that the trainer is stable.
4. Connect the trainer to a standard mains socket using the original mains adapter.
5. The standard freehub of the trainer is of the Shimano HG type, which is compatible with the
standard Shimano/Sram 8-11 speed cassette.
NOTE: 11s cassette can be installed directly, 8-10s cassette may need the spacer. (The cassette
is not included in the standard accessories.)
6. Place the trainer on a level surface and ensure that there are no obstacles or dangerous
objects nearby.
19