Cleaning And Storing The Unit; Technical Specifications - Beurer BM 90 Gebrauchsanweisung

In such cases, repeat the measurement. Ensure that the cuff line is correctly attached and that you do not move
or speak. If necessary, reinsert or replace the batteries.

10. Cleaning and storing the unit

Clean your blood pressure monitor carefully using a slightly damp cloth only.
•
Do not use any cleaning agents or solvents.
•
Under no circumstances should you hold the unit under water, as this can cause liquid to enter and damage
•
the unit.
When you store the unit, no heavy objects should be placed on top of it. Remove the batteries. The cuff line
•
should not be bent sharply.

11. Technical specifications

Model no.
Measurement method
Measurement range
Display accuracy
Measurement inaccuracy
Memory
Dimensions
Weight
Cuff size
Permissible operating conditions
Permissible storage conditions
Power supply
Battery life
Radio frequency
Protection class
Classification
BM 90
Oscillometric, non-invasive blood pressure measurement on the upper
arm
Cuff pressure 0–300 mmHg, systolic 30–280 mmHg, diastolic 30–280
mmHg, pulse 40–199 beats per minute
systolic ± 3 mmHg/diastolic ± 3 mmHg/
pulse ± 5% of the value shown
max. permissible standard deviation according to clinical testing:
systolic 8 mmHg/diastolic 8 mmHg
60 memory spaces
L 140 mm x W 60 mm x H 56 mm
Approximately 471 g (without batteries)
22 to 42 cm
+5°C to +40°C, ≤ 80% relative humidity (non-condensing)
-20°C to +60°C, < 10–93% relative humidity
Ambient pressure: 800–1050 hPa
6V (4x 1.5V AAA)
For approx. 120 measurements, depending on levels of blood pressure
and pump pressure
RF 868MHz
Internal supply, IPX0, no AP or APG, continuous operation
Application part type B
23