Troubleshooting; Cleaning And Care; General Information - Klarstein BARETT Bedienungsanleitung

EN
34

TROUBLESHOOTING

Problem
The light turns on but the
engine does not run.
Lights and engine do not
work.
The light does not work.
Unsatisfactory suction
performance
The extractor bonnet
hangs crooked.

CLEANING AND CARE

Before maintenance or cleaning, the cooker bonnet should always be disconnected
from the power supply. Make sure that the cooker bonnet is switched off and the plug
has been removed. Exterior surfaces are prone to scratches and dents. Therefore, please
follow the cleaning instructions to achieve the best possible result without damage.

General information

Allow the appliance to cool down completely before cleaning and maintenance and do
not use alkaline or acidic substances such as lemon juice or vinegar to clean the surface.
Potential cause
The motor is switched off.
The motor switch is broken. Contact a specialist
The motor is broken.
Your mains security fuse is
flipped or broken.
The power cable is loose
or not connected.
The light is broken.
The distance between the
cooker and the extractor
bonnet is too far.
One of the fixing screws is
not properly tightened.
Possible solution
Switch on the motor with
the SPEED button.
company.
Contact a specialist
company.
Flip the fuse switch or
replace the fuse
Connect the power cord
correctly.
Replace the bulb.
Reduce the distance.
Tighten the screw securely.