Troubleshooting; Insufficient Suction - Klarstein VILHELMINE Bedienungsanleitung

TROUBLESHOOTING#

Fault
Light on, but motor
does not work.
Light does not
work, motor does
not work.
Oil leakage
Lights not working

Insufficient suction

The Cooker hood
inclines
Possible Cause
Fan switch turned off
Fan switch failed
Motor failed
House fuses blown
Power cord loose or
disconnected
One way valve and the
outlet are not tightly
sealed
Leakage from the
connection of chimney
and cover
Broken/Faulty globes
The distance between
the cooker hood and the
gas top is too far
The fixing screw not
tight enough
Solution
Select a fan switch
position.
Contact service center.
Contact service center.
Reset/Replace fuses.
Refit cord to power
outlet.
Switch power outlet on.
Take down the one way
valve and seal with
sealant.
Take chimney down and
seal.
Replace globes as per
this instruction.
Refit the cooker hood to
the correct distance.
Tighten the hanging
screw and make it
horizontal.
EN
35