Klarstein BARETT Bedienungsanleitung Seite 37

Replace the light bulb
• The lamp must be replaced by the manufacturer, its after-sales service or similarly
qualified persons.
• Always switch off the power supply before carrying out any work on the appliance.
When handling the light bulb, make sure that it has cooled down completely before
touching it directly with your hands.
• Always hold the light bulb with a cloth or gloves when inserting or removing it to
ensure that sweat does not come into contact with the lamp, as this can reduce its
life.
To replace the light bulb:
1 Before changing the lighting, make sure that the cooker bonnet is switched off.
2 Rotate the cover counter-clockwise. Loosen the screw of the stainless steel filter and
remove it.
3 Press the light connector to remove the light bulb.
4 Install the new light and reconnect the cable.
Important information about the illuminant
LED type: Round glass lamp
Maximum wattage: 1 W
Voltage range: DC 4V
Dimensions: see illustration
EN
37