Explanation Of Ip Protection Class; Minimum Distance To Illuminated Surface; Minimum Distance To Normally Flammable Materials - Cameo S4 IP Bedienungsanleitung

EXPLANATION OF IP PROTECTION CLASS

1. An IP rating only reflects protection from solid objects and water. It does not describe general
weather resistance, such as protection from UV radiation and temperature, etc.
2. The first identification digit indicates protection from dust, solid objects and contact:
IP2X Protected against solid foreign bodies ≥ 12.5 mm in diameter
IP3X Protected against solid foreign bodies ≥ 2.5 mm in diameter
IP4X Protected against solid foreign bodies ≥ 1.0 mm in diameter
IP5X Protected against dust in harmful quantities and completely protected against
contact
IP6X Are dust-tight and completely protected against contact
3. The second identification digit indicates protection from water:
IPX0 No protection
IPX1 Protection against dripping water
IPX2 Protection against dripping water when the device is tilted up to 15°
IPX3 Protection against falling spray water up to 60° from the vertical
IPX4 Protection against splashing water on all sides
IPX5 Protection against water jets (nozzle) from any angle
IPX6 Protection against strong water jets
IPX7 Protection against temporary immersion
4. In addition, some device-specific measures, such as covers and sealing caps, are necessary in
order to achieve the specified protection class (e.g. protective caps on unused connections).

MINIMUM DISTANCE TO ILLUMINATED SURFACE

This symbol with distance specification in metres (m) indicates the minimum
0.5 m
distance between the light head and the illuminated surface. In this example, the
distance is 0.5 m. The value applicable for this unit can be found in the technical
data in this manual and the imprint on the unit housing!

MINIMUM DISTANCE TO NORMALLY FLAMMABLE MATERIALS

This symbol with distance specification in metres (m) indicates the minimum
0.5 m
distance between the light head and normally flammable materials. In this example,
the distance is 0.5 m. The value applicable for this unit can be found in the
technical data in this manual!
43