Cameo S4 IP Bedienungsanleitung Seite 24

STANDALONE MODE 'PLAY LOOP'
Starting from the main display, press the left push button rotary encoder to access the menu
for selecting the mode. Rotate the left encoder (SELECT) to SELECT Play Loop (see left arrow)
and confirm by pressing the left encoder (ENTER). Now select one of the 8 pre-programmed
but individually editable colour sequences by turning the left encoder. Confirm your selection by
pressing the left encoder (ENTER). The brightness (DIM) of the colour sequence is now set using
the left encoder, the step duration (0.1 seconds to 21 minutes and 2 random modes) and the fade
time (0 seconds to 18 minutes and 2 random modes) using the middle and right encoders (see
illustration). The individual settings and renaming of the colour sequences can be done in the Edit
Loop menu item in the main menu.
Rotate encoder =
Set brightness (DIM)
Press encoder =
Mode selection
STANDALONE MODE 'EDIT LOOP'
Starting from the main display, press the right rotary-push encoder to enter the main menu
(MENU). Turn the left encoder (SELECT) to choose the Edit Loop menu item (as indicated by the
selection arrow on the left) and confirm by pressing the left encoder (ENTER). Now you can select
one of the 8 colour sequences by turning the left encoder and confirming the selection by
pressing the left encoder (ENTER).
24
Rotate encoder =
Set fade time (t-Fade)
Press encoder =
Open the main menu (Menu)
Rotate encoder =
Set step duration (t-Step)
Press encoder =
back to colour sequence selection (Back)