Electrical Connection; Cleaning; Storage; Maintenance - Scheppach AB1500MAX Original Bedienungsanleitung

Replacing the mains connection cable
If the mains connection cable of this device is
damaged, it must be replaced by the manufacturer,
their service department or a similarly qualified
person to avoid dangers.

10. Electrical connection

The electrical motor installed is connected and ready
for operation. The connection complies with the
applicable VDE and DIN provisions.
The customer's mains connection as well as the
extension cable used must also comply with these
regulations.
Damaged electrical connection cable
The insulation on electrical connection cables is
often damaged.
This may have the following causes:
• Pressure points, where connection cables are
passed through windows or doors.
• Kinks where the connection cable has been
improperly fastened or routed.
• Places where the connection cables have been cut
due to being driven over.
• Insulation damage due to being ripped out of the
wall outlet.
• Cracks due to the insulation ageing.
Such damaged electrical connection cables must not
be used and are life-threatening due to the insulation
damage.
Check the electrical connection cables for damage
regularly. Ensure that the connection cables are
disconnected from electrical power when checking
for damage.
Electrical connection cables must comply with
the applicable VDE and DIN provisions. Only use
connection cables of the same designation.
The printing of the type designation on the connection
cable is mandatory.
For single-phase AC motors, we recommend a fuse
rating of C 16A or K 16A for machines with a high
starting current (from 3000 watts)!

11. Cleaning

Attention!
Disconnect the mains plug before carrying out any
cleaning work.
We recommend that you clean the device directly
after every use.
Wipe swarf and dust off the machine from time to time
with a cloth.
Clean the device at regular intervals using a damp
cloth and a little soft soap. Do not use any cleaning
products or solvents; they could attack the plastic
parts of the device. Make sure that no water can
penetrate the device interior.

12. Storage

Store the device and its accessories in a dark, dry
and frost-free place that is inaccessible to children.
The optimum storage temperature lies between 5 and
30 ˚C.
Store the power tool in its original packaging.
Cover the power tool to protect it from dust or moisture.
Store the operating manual with the power tool.

13. Maintenance

Attention!
Disconnect the mains plug before carrying out any
maintenance work.
Connections and repairs
Connections and repair work on the electrical
equipment may only be carried out by electricians.
Carbon brushes
If excessive sparks are generated, have an electrician
check the carbon brushes.
Attention! The carbon brushes must only be replaced
by an electrician.
Maintenance
The device has no further internal parts that require
maintenance.
Please provide the following information in the
event of any enquiries:
• Type of current for the motor
• Data of machine type plate
• Data of motor type plate
www.scheppach.com
GB | 21