Troubleshooting; Possible Cause - Scheppach AB1500MAX Original Bedienungsanleitung

15. Troubleshooting

The following table shows fault symptoms and describes remedial measures in the event of your machine failing to work
properly. If you cannot localise and rectify the problem with this, please contact your service workshop.
Fault
Motor does not start
Motor not supplying power,
fuse tripping

Possible cause

Mains fuse blown
Extension cable defective
Connection to the motor or switch not
OK
Motor or switch faulty
Carbon brushes defective
Cross section of the extension cable
insufficient
Overload
Electrical system defect
www.scheppach.com
Remedy
Check mains fuse
Replace extension lead
Have this checked by an electrician
Have this checked by an electrician
Have this checked by an electrician
see Electrical connection
Check tool
Have this checked by an electrician
GB | 23