Rollei Fly 100pro Anleitung Seite 94

App
94
Once the smartphone and quadrocopter [1] are connected, open the app. On
the start screen you will now be asked to change the WIFI password of the
quadrocopter [1]. Without changing the password, the quadrocopter [1] is not
ready for flight. The new password must consist of 8 upper and lower case
letters and numbers (e.g.: "Rollei01").
– Tap the Change password option on the start screen.
– Enter the new password and confirm the entry with "Activate".
– Make a note of the new password. A forgotten password is not subject
to any guarantee or warranty!
– Switch the quadrocopter [1] off and on again.
– Reconnect the quadrocopter [1] to the WIFI of your smartphone. Use the
new password for this.
– Open the "Rollei Air GPS" app and select the "Start flight" option.
– The quadrocopter [1] is now ready to fly.
Note:
– When the quadrocopter [1] is connected to your smartphone, you do not
have an internet connection.
– Without changing the WIFI password, the quadrocopter is not ready to
fly.
– The new password must consist of 8 upper case letters, lower case
letters and numbers.
– The quadrocopter [1] must be switched off and on again after changing
the password.The password protection is used to ensure that no one
can dial into the existing WIFI connection and control the drone without
your consent.
ENGLISH