Advanced Functions; Setting The Speed - Rollei Fly 100pro Anleitung

First Flight Exercises
86
Landing and switching off the rotors
1. Push the left control lever [21] down to steer the quadrocopter [1] to a
low altitude.
2. Look for a suitable, level landing site.
3. Push the left control lever [21] down again until the quadrocopter [1]
makes contact with the ground.
4. The rotors [31] and [36] will stop automatically if the quadrocopter [1]
does not receive any further signals from the remote control within 20
seconds.
Notice! Attention! Do not attack the quadrocopter [1] until the rotors
[31] and [36] have come to a standstill. Rotating rotors can cause serious
injuries.

Advanced Functions

After you have familiarised yourself with the controls of the Quadrocopter
[1], you can use other functions and flight modes of the Quadrocopter [1].

Setting the speed

You can set three speed modes via the remo-
te control [5]: Beginner mode, Normal mode
and Advanced mode.
ENGLISH