Headless Mode - Rollei Fly 100pro Anleitung

Advanced Functions
– Automatic landing: Press the Auto Take-off/Landing button [11] while
the quadrocopter [1] is in flight, it will automatically reduce altitude and
land. Make sure that the landing takes place on a flat surface without
obstacles.
– Emergency stop: Press the auto take-off/landing button [11] for 3 se-
conds during the flight of the quadrocopter [1]. The rotors [31] and [36]
of the quadrocopter [1] switch off and the quadrocopter [1] crashes.
Only use this function in an extreme emergency to reduce the risk of
injury or damage.

Headless mode

In headless mode, the quadrocopter [1] will always fly forward, left, right
or backward when you press the right control lever [12] in the correspon-
ding direction. It does not matter which direction the quadrocopter [1] is
facing at that moment. It is important that the remote control [5] main-
tains the position in which it was connected to the quadrocopter [1].
To activate the headless mode, place the quadrocopter [1] on a flat surface
with the back of the quadrocopter [1] facing you. Press the GPS/Headless
Mode button [22] on the remote control [5]. The Headless Mode LED
[14] on the remote control goes out. The position LEDs that are pointing
forwards at this moment now light up white.
To deactivate the headless mode, press the GPS/Headless Mode button
[22] again.
89