Rollei Fly 100pro Anleitung Seite 87

Advanced Functions
– Beginner: When the Quadrocopter [1] is switched on, the Beginner
mode is activated at the factory.
– Normal: Press the speed wheel [26] once to the right. The remote
control [5] emits a short acoustic signal. Normal mode is activated.
– Advanced: Press the speed wheel [26] to the right again. The remote
control [5] emits an acoustic signal again. The advanced mode is activa-
ted.
Press the speed wheel [26] to the left to return to the previous mode. If
you hear a long beep when you press the speed wheel [26], this indicates
that you have already activated the highest or lowest speed mode.
Photo and video recording
Your quadrocopter [1] is equipped with a Full HD moving camera [32] that
allows you to take photos and videos from a bird's eye view.
1. Make sure that you have inserted a memory card* in the memory card
slot [34] of your quadrocopter [1].
2. Control the angle of the camera using the camera angle wheel [27].
3. Push the camera angle wheel [27] to the left to move the camera
upwards. An acoustic signal sounds.
4. Push the camera angle wheel [27] to the right to move the camera
downwards. An acoustic signal sounds.
5. Start taking a photo by pressing the Photo Shutter Button [29] once. The
remote control [5] emits 2 acoustic signals.
87
*not included