Troubleshooting - Silvercrest SDR 1000 A1 Bedienungsanleitung

__RP61923_Buch3.book Seite 16 Montag, 29. August 2011 11:39 11
9.

Troubleshooting

If your appliance fails to function as required, please try this
checklist first. Perhaps there is only a minor problem and you
can solve it yourself.
DANGER! Do not attempt to repair the appliance your-
self under any circumstances.
Fault
•
The LED 5 does not
•
glow while charging.
•
•
•
The appliance can-
•
not be switched on.
You experience a •
pulling sensation •
when shaving and/or
the shave is less
close than usual.
16
GB
Possible causes/Action
Is the appliance being supplied with
power?
Check the connections.
Is the appliance fitted correctly into
the charging stand 15?
Is the rechargeable battery flat?
Did you press the release button 6
when switching on?
Is the appliance connected to the
power supply? If so the appliance
cannot be switched on. This is a pro-
tective function.
Oil the shaving foil 1.
If that does not help, it may be nec-
essary to replace the shaving foil 1.