Storage; Troubleshooting - Silvercrest SBT 1.5 B1 Bedienungsanleitung

6) Place the rotating blades
so that the rotating blades
7) Push the connecting piece
protruding spacer of the connecting piece
you (see fig. 1). Ensure that the indentations on the cutting head
cover
cover
8) Push the connecting piece
into place and sits tightly.
9) Replace the shaving head
head
the shaving head
10) Replace the protective cap

Storage

■ Always protect the shaving head
cap
■ Store the appliance in a dry and dust-free location.

Troubleshooting

The appliance is not working:
■ Replace the battery.
■ The appliance is defective. Contact the Customer Service department.
Not all hairs are plucked:
■ You are working too fast. Move the appliance over your skin slowly.
■ 12
Downloaded from www.Manualslib.com
slide into the catches on the inside of the cutting head
.
in the direction of the arrow
points to the
.
│ GB │ IE │ NI
manuals search engine
centred into the cutting head cover
rest against the cutting head cover
into the cutting head housing
must point towards
firmly downwards so that it clicks
on the housing and turn the shaving
until the marking on
marking on the housing.
on the housing.
with the supplied protective
,
.
. The
SBT 1.5 B1