Herunterladen Inhalt Inhalt Diese Seite drucken

Description Of Symbols; Standard Equipment - Stihl GH 370 S Gebrauchsanleitung

Vorschau ausblenden Andere Handbücher für GH 370 S:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Only store the machine with the spark plug
socket disconnected.
Store the machine in good operational
condition.
Only transport the garden shredder with
the feed chute fitted.
Risk of injury due to exposed blades.
4.9 Disposal
Waste products such as used engine oil or
fuel, used lubricants, filters, batteries and
similar wearing parts can be harmful to
people, animals and the environment, and
must consequently be disposed of
properly.
Consult your recycling centre or your
specialist dealer for information on the
proper disposal of waste products. STIHL
recommends STIHL specialist dealers.
Ensure that old machines are properly
disposed of. Render the machine
unusable prior to disposal. In order to
prevent accidents, remove the ignition
lead, empty the fuel tank and drain the
engine oil in particular.
Risk of injury from the blades.
Always store an old garden shredder in a
safe place prior to scrapping. Ensure that
the machine and particularly all the blades
are kept out of the reach of children.

5. Description of symbols

36
Attention!
Read the instruction manual and follow the
safety instructions before initial use.
Risk of injury!
Keep other people out of the danger area.
Risk of injury!
Risk of injury caused by rotating tools.
Attention!
Detach the spark plug socket before
performing any maintenance or cleaning
operations.
Wear hearing protection.
Wear safety glasses.
Wear protective gloves.
Risk of injury:
Never put your hands or any
other part of your body or
clothing into the feed chute
or ejection chute.
Risk of injury:
Do not climb onto the
machine.

6. Standard equipment

Item
Designation
A
Feed chute
B
Basic unit
C
Wheel carrier
D
Discharge flap
E
Ejection chute extension
F
Strip
G
Wheel
H
Wheel cap
I
Blade disc
J
Torx screw
P5x20
K1
Nut M10
K2
Lock nut M8
L1
Washer
L2
Washer A10
M
Torx screw
P5x50
N
Flat head bolt
M8x45
O
Hexagon screw
M10x55
P
Retaining washer
Q
Closure screw
R
Wheel pin
S
Pin
T
Deflector
U
Upper spacing ring
0478 216 9908 A - EN
2
Qty.
1
1
1
1
1
1
2
2
1
5
2
2
2
2
1
2
1
1
2
2
2
1
1

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis