Dentsply Sirona ProPex II Benutzerhandbuch Seite 222

Step-by-Step Instructions
6.10 Maintenance of your ProPex
• The device does not contain user serviceable parts. The service
and repair should be provided by factory trained service personnel
only.
• After each use, all the objects that were in contact with infectious
agents should be cleaned using towels impregnated with a
disinfecting and detergent solution (a bactericidal, fungicidal and
aldehyde free solution). Use of chemical agents may cause
damage to the equipment. We recommend to use only a
disinfecting solution which is approved for its efficacy (VAH/DGHM-
listing, CE marking, FDA approval).
• Other recommendations:
- do not expose ProPex
with chemical solutions used for treatment. These chemicals could
cause damage, deform or discolor the device. Be especially
careful to avoid spilling formalin cresol (FC) and sodium
hypochlorite as they are quite aggressive. Wipe up any chemical
spills immediately (some chemicals may leave discoloration and
spots even if they are immediately wiped up);
- handle the device carefully; do not drop, bump or expose the unit
to any kind of impact or shock. Rough handling could cause
significant damage;
- do not drop anything on or bang the measuring cable plug after it
has been inserted into the connector;
- ProPex
humidity conditions.
• Reprocessing procedure:
- the lip clip, the hook and the fork must be sterilized between
treatments by autoclaving at 134°C;
- the measuring cable cannot be autoclaved.
See the section
detailed procedure.
22/50
®
II to any liquid. In particular, avoid spilling
®
II must be stored in normal temperature (< 60°C) and
7 Cleaning, Disinfection and sterilization
B EN PIIS DFU WEB / Rev.04 / 02-2018 (Old ZF 1902127.EN)
®
II
for the