Herunterladen Inhalt Inhalt Diese Seite drucken

Warranty Period; Warranty Statement; Warranty Terms; Specifications - Dentsply Sirona Cavitron Plus Gebrauchsanleitung

Vorschau ausblenden Andere Handbücher für Cavitron Plus:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 50

13. Warranty Period

The Cavitron Plus Ultrasonic Scaler is warranted for TWO YEARS from date of purchase. The Steri-Mate 360 Handpiece enclosed with
your system is warranted for SIX MONTHS from date of purchase.

WARRANTY STATEMENT

Dentsply Sirona Cavitron products are designed expressly for dental use, and this warranty is not applicable to other uses. The prod-
ucts are warranted against defects arising from faulty materials or workmanship from date of purchase for the period stated in the
Directions for Use manual furnished with the product. Parts will be repaired or replaced at the discretion of Dentsply Sirona.

WARRANTY TERMS

This warranty extends to Cavitron products purchased from an authorized Dentsply Sirona distributor, and only to the original purchas-
er. The Warranty is subject to the following conditions:
1.
The product registration card must be completed and returned to Dentsply Sirona within four(4) weeks of date of purchase.
2. Any installation or routine servicing of Cavitron product must be performed by Dentsply Sirona Cavitron Care
rized Dentsply Sirona distributor service personnel.
3. Any warranty repair must be performed by Dentsply Sirona Cavitron Care
4. Cavitron Systems and handpieces must not be subjected to abuse or improper installation or operation.
5. Cavitron Ultrasonic Inserts and air polishing nozzles are subject to these additional terms:
a. Inserts and air polishing nozzles must not be subjected to abuse, improper use or application, including, but not limited to,
bending and reshaping.
b. Inserts and air polishing nozzles must not be subjected to improper cleaning, disinfection or sterilization procedures.
c. Warranty will not be honored for inserts used in units other than Cavitron units.
6.
The use of any inserts or air polishing nozzles other than Cavitron will void the warranty on Cavitron Ultrasonic Scalers and Air
Polishing Systems.
7.
Use of an air polishing powder other than Cavitron prophy powders in the Air Polishing Prophylaxis systems will void their warran-
ties.
There are no warranties, express or implied, which extend beyond the description on the face hereof. Dentsply Sirona neither
assumes, nor authorizes any person to assume for it, any other liability in connection with the sale or use of its products. Damages
are limited strictly to repair or replacement of parts. Dentsply Sirona expressly disclaims liability for incidental and consequential
damages resulting from the use of the products.
Claims covered by this warranty will be honored when presented through your Dentsply Sirona distributor within thirty (30) days from
discovery of defect within the applicable warranty period.

14. Specifications

Electrical Voltage
Current
Phase
Frequency
Water Pressure
Water Temperature
Water Flow Rate
Weight
Dimensions
Footswitch
Remote Communication
Operating Environment
Transport and Storage Conditions
Continuous (100-240 VAC)
1.0 Amperes, Maximum
Single
50/60 Hertz
20 to 40 psig (138 to 275 kPa)
< 25°C (77°F)
Minimum Setting (CCW) < 15 ml/min
Maximum Setting (CW) > 55 ml/min
4.4 lbs (2 Kg)
Height: 6 in (15, 24 cm)
Width: 9.5 in (24, 13 cm)
Depth: 8 in (20, 32 cm)
Handpiece Cable length: 6.5 ft (2.0 M)
Auxillary Footswitch Cable length: 8 ft (2.4 M)
Water Supply Line length: 8 ft (2.4 M)
Protection Class IPX1.
Not for operating theatres.
Frequency: 2405 to 2480 MHz
Power: < 1mW
Channels: 16
Temperature:
15 to 40 Deg Celsius
(59 to 104 Deg Fahrenheit)
Relative Humidity:
30% to 75% (non-condensing)
Temperature:
40 to 70 Deg. Celsius
(-40 to 158 Deg. Fahrenheit)
Relative Humidity:
10% to 95% (non-condensing)
Atmospheric Pressure: 500 to 1060 hPa
Service.
SM
Service or autho-
SM
English - 15

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis