Pre-Setting The Tracking Force - Clearaudio TT2 Bedienungsanleitung

User manual / Bedienungsanleitung

6. Pre-Setting the tracking force

To make the adjustment, first remove the stylus protector. Please handle all equipment
with care to avoid any damage.
By pulling the security bolt of the folding base you can release the tonearm from its vertical position
to lower it onto the turntable platter.
Use one of the counterweights supplied to pre-adjust the tracking force by sliding it onto the back
of the headshell tube (Pic. 20).
The choice of counterweight depends on the weight of the cartridge.
Pic. 20: Mounting the counterweight
Please only pre-adjust the tracking force of the cartridge.
The correct setting will be made at the end of the tonearm settings.
Use the 1.5mm hex wrench to tighten the counterweight fixing screws.
To tighten the screws, we recommend lifting the tonearm back to the vertical position (see Pic. 21).
Pic. 21: Fixing the counterweight
To check the tracking force, we recommend the Clearaudio Weight Watcher touch digital cartridge
weight (Art. No. AC163, also available at www.analogshop.de).
Made in Germany Page / Seite 13