User manual / Bedienungsanleitung
5.4 Adjustment of the tracking force
To increase or lower the tracking force, you have to turn the adjustment screw at the end of the
tonearm.
Pic. 15: Adjustment of the tracking force
Use the chart below to check whether the correct weight is installed for your cartridge.
Please follow the instructions of the respective cartridge manufacturer.
If an exchange is necessary, you can loosen the screw on the underside of the counterweight using
an hex wrench (#1.5).
Classification of the counterweights for different cartridges, with a recommended
tracking force of 2.8g for
Counterweight in g
18.3g
31.5g
(pre-mounted)
49.0g
66.0g
85.0g
Classification of the counterweights for different cartridges, with a recommended
tracking force of 2.8g for
Counterweight in g
49.0g
(pre-mounted)
66.0g
85.0g
For the correct setting we recommend using the Clearaudio Weight Watcher touch digital cartridge
scale (Art. No. AC163, also available at www.analogshop.de).
Page / Seite 14
Universal
9":
From...
2.9g
5.1g
7.7g
11.2g
15.0g
Universal
12":
From...
2.9g
5.6g
8.5g
Green arrow = Higher tracking force
Red arrow = Lower tracking force
Cartidge weight
to....
5.3g
8.9g
14.9g
19.9g
24.8g
Cartidge weight
to....
11.3g
16.2g
21.0g
© clearaudio electronic GmbH, 2021-09