Installation, Connection And Initial Commissioning; Choosing A Suitable Location; Having The Outlet Hose Connected - hanseatic HGTI6082B14U7709WS Gebrauchsanleitung

Installation, connection and initial commissioning

Choosing a suitable location

CAUTION
Risk of injury!
The appliance is heavy and bulky. Im-
proper handling of the appliance may
result in injury.
■ Seek the help of another person dur-
ing transport, installation and assem-
bly.
■ If a trolley is used to move the appli-
ance, the appliance must be moved
as shown on the packaging.
■ Only lift the appliance as shown on
the packaging.
■ Remove all obstacles on the transport
route and from the installation loca-
tion, e.g. open appliance doors and
clear away objects lying on the floor.
The planned location must fulfil the following
prerequisites:
– The location must be a dry and frost-safe
room with a firm ground.
– In order to install the connection pipes,
the appliance must be positioned near to
a washing/dishwashing basin or the floor
drain.
Installation, connection and initial commissioning
Having the outlet hose
connected
Malfunction!
Failing to connect the appliance cor-
rectly may cause malfunctions during
operation.
■ Make sure that the waste water can
■ Ensure that there are no kinks or dam-
■ Make sure that the end of the hose is
■ Do not extend the outlet hose or re-
You can connect the end of the outlet hose in
two different ways:
– Connection to a floor drain.
– Direct connection to the odour seal (si-
NOTICE
drain freely at any time. To that end,
the outlet pipe must have a minimum
diameter of 40 mm.
age to the outlet hose.
not submerged in the pumped water.
place with another drainage pipe.
Ø ≥ 40 mm
phon) of your washing/dishwashing basin.
Technical measures are required for this.
For this reason, only plumbing experts or
members of our Service department may
connect the outlet hose (see page EN-44).
It must not be more than 1000 mm above
the floor.
Page EN-31