Aligning The Appliance - hanseatic HGTI6082B14U7709WS Gebrauchsanleitung

2. Remove the 4 screws from the left and
right front edges of the unit.
3. Remove the protective films from the
sound-absorbing strips (46).
4. Affix the sound-absorbing strips to the left
and right front edges of the dishwasher.
Make sure that the screw holes are posi-
tioned correctly.
Installation, connection and initial commissioning
5. Fasten the sound-absorbing strips with

Aligning the appliance

To level the appliance, the two front adjusta-
ble feet (41) and the back foot can be adjust-
ed by up to 50 mm.
(46)
The front adjustable feet are equipped with
slots.
You can adjust the height of the rear adjusta-
ble foot with the centre adjusting screw.
1. Insert a screwdriver into one of the slots
2. Use a cross-headed screwdriver to set up
the 4 screws.
(41)
and turn the adjustable feet to the height
required.
the front adjustable feet.
Page EN-35