Used Batteries; Storage; Maintenance; Disposal And Protection Of The Environment - Parkside PAPK 12 A2 Originalbetriebsanleitung

GB CY
2. To insert the battery (1), push
the battery along the guide rail
into the device. You will hear it
click into place.
Only insert the re-
chargeable battery once
the battery-operated
tool is ready for use.

Used batteries

• If a fully recharged battery lasts
for considerably shorter operat-
ing times, the battery is used
up and needs to be replaced.
Only use an OEM battery pack
replacement available from our
Customer Service.
• Always take heed of the appli-
cable safety instructions as well
as the environmental protection
regulations and information (see
"Cleaning and Maintenance").

Storage

• Only store the batteries in the
partially-charged state. During
prolonged storage, 2 to 3 LEDs
should be illuminated. The bat-
tery charge status indicator of
the battery-operated tool signal-
ises the state of charge of the
battery (1).
• Remove the battery before stor-
ing the unit for longer periods of
time.
• During a longer storage period,
8
check the state of charge of the
battery and recharge if neces-
sary roughly every 3 months.
• The ideal storage temperature
for the battery is between 0 °C
and 45 °C. Avoid extreme cold
or heat during storage to ensure
the battery output is not adverse-
ly affected.

Maintenance

• The appliance cleaner is mainte-
nance free.
Disposal and
protection of the
environment
Remove the battery from the device
and take the device, battery, acces-
sories and packaging for environ-
mentally friendly recycling.
Machines do not belong with
domestic waste.
Do not dispose of batteries
in household waste, fire (risk
of explosion) or water. Dam-
aged batteries may damage
the environment and your
health if toxic fumes or liq-
uids leak out.
• Return the unit to a recycling
centre. The plastics and metals
in the unit can be sorted and