HAPRO V10 Anleitung Seite 18

Reset hour counter for the lamps
18
The parameter "1" will appear at the top of the display and "SAVED" will scroll
across the bottom to con rm that the number has been saved.
The parameter "1" will appear at the top of the display, and the name of the
parameter "START TIME" will scroll across the bottom.
Press <STOP> 2x to exit the con guration mode.
The message "LUXURA, IT'S YOUR BODY" will appear on the display.
The hour counter for the lamps should be reset after replacing the lamps.
Press the following keys successively:
<STOP> <STOP> <PLUS> <STOP> <MIN>
The main parameter "P1" will appear at the top of the display, and the name of the
main parameter "UNIT" will scroll across the bottom.
Press <START> 1x.