HAPRO V10 Anleitung Seite 19

The parameter "1" will appear at the top of the display, and the name of the
parameter "START TIME" will scroll across the bottom.
Use the <MIN> and <PLUS> keys to navigate to parameter "4". (Press <PLUS> 3x.)
The parameter "4" will appear at the top of the display, and the name of the
parameter "RESET LAMP HOUR COUNTER" will scroll across the bottom.
Press <START> 1x.
The number "4" will appear at the top of the display and "OFF" will appear at the
bottom.
Press <PLUS> 1x to change "OFF" to "ON".
Press <START> to reset the hour counter.
The number "4" will appear at the top of the display and the message "LAMPS
HOUR COUNTER RESET" will scroll 1x across the bottom. After this de message
"RESET LAMP HOUR COUNTER" will scroll across the bottom.
Press <STOP> 2x to exit the con guration mode.
The message "LUXURA, IT'S YOUR BODY" will appear on the display.
Check
Press the <MIN> and <LIFT> keys at the same time for 3 seconds to read the lamp
hour counter.
The code "HL" will appear at the top of the display and the number "0" will scroll
at the bottom.
+ +
3 sec.
ENGLISH
19