Herunterladen Inhalt Inhalt Diese Seite drucken

Introduction; Safety Instruction; Unpacking; Installation - JB-Lighting P8 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

P8

3. Introduction

3.1 Safety instruction

WARNING: This device is for professional use only! Protection rating IP 20 - only
!
indoor use
WARNING: LED Radiation - do not look into the beam at a distance of less than
5 meters (197 inches) from the front surface of the product. Do not view the light
output with optical instruments or any device that may concentrate the beam. LED
class 3 according to EN 62471.
WARNING: JB-Lighting Lichtanlagentechnik GmbH does not authorize or warrant
!
its products for use in life support systems. Life support systems are equipment in-
tended to support or sustain life, and whose failure to perform, when properly used
in accordance with instructions provided, can be reasonably expected to result in
personal injury or death.
This product conforms to the European Community Directives:
- Low voltage directive 2014/35/EU
- Electromagnetic compatibility 2014/30/EU
ATTENTION: Cet appareil ne convient que pour un usage professionnel! Degré de
!
protection: IP 20
ATTENTION: Rayonnement LED - Ne pas regarder le faisceau à moins de 5m ou à
l'aide d'un instrument à optiques. LED classe 3 selon la norme DIN EN 62471
ATTENTION: JB-Lighting Lichtanlagentechnik GmbH n'autorise pas l'utilisation
!
de leurs appareils dans des systèmes ou dispositifs permettant le maintient en vie.
Sont considère systèmes ou dispositifs de maintient en vie tous systèmes qui ont
pour but de maintenir la vie ou de la stabilisée et qu'un défaut ou défaillance éven-
tuelle de celui-ci ne blesse ou entraine la mort d'autrui.
Le produit décrit dans ce manuel est conforme aux directives Européennes suivantes:
- Directive appliquée à la Basse Tension 2014/35/EU
- Directive CEM 2014/30/EU

3.2 Unpacking

This package contains the P8, two omega brackets with 1/4 turn fasteners, this manual as well
as a power cable with PowerCon connector (no cable in US model).
Open the top of the box and remove the inlay. Remove the unit from the box. For any damage
occuring during transport, report to the transport company immediately.

4. Installation

4.1 Connection to Mains

WARNING: To ensure propper installation of the plug consult a qualified technician!
!
ATTENTION: Installation de la connexion au réseau doit être effectuée par un pro-
fessionnel!
- 30 -

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

P 18

Inhaltsverzeichnis