Herunterladen Inhalt Inhalt Diese Seite drucken

Introduction; Safety Instruction; Unpacking; Installation - JB-Lighting SPARX 7 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für SPARX 7:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

2. Introduction

2.1 Safety instruction

WARNING: This device is for professional use only!
!
Protection rating IP 20
WARNING: LED Radiation - do not look into the beam at a distance of less
than 5 meters (197 inches) from the front surface of the product. Do not
view the light output with optical instruments or any device that may
concentrate the beam.
LED class 3 according to EN 62471.
WARNING: JB-Lighting Lichtanlagentechnik GmbH does not authorize or
!
warrant its products for use in life support systems.
Life support systems are equipment intended to support or sustain life,
and whose failure to perform, when properly used in accordance with
instructions provided, can be reasonably expected to result in personal
injury or death.
This product conforms to the European Community Directives:
- Low Voltage 2006/95/CE
- Electromagnetic Compatibility 89/336
ATTENTION: Cet appareil ne convient que pour un usage professionnel !
!
Degré de protection: IP 20
ATTENTION: Rayonnement LED - Ne pas regarder le faisceau à moins de
5m ou à l'aide d'un instrument à optiques.
LED classe 3 selon la norme DIN EN 62471
ATTENTION: JB-Lighting Lichtanlagentechnik GmbH n'autorise pas l'ut-
!
ilisation de leurs appareils dans des systèmes ou dispositifs permettant
le maintient en vie. Sont considère systèmes ou dispositifs de maintient
en vie tous systèmes qui ont pour but de maintenir la vie ou de la stabil-
isée et qu'un défaut ou défaillance éventuelle de celui-ci ne blesse ou
entraine la mort d'autrui.
Le produit décrit dans ce manuel est conforme aux directives Européen-
nes suivantes :
-Directive appliquée à la Basse Tension 2006/95/ CE
- EMV 89 /336

2.2 Unpacking

This package contains the Sparx7 and two omega brackets with 1/4 turn fasteners.
Open the top of the box and remove the inlay. Remove the unit from the box. For any
damage occuring during transport, report to the transport company immediately.

3. Installation

3.1 Mains connection

WARNING: To ensure propper installation of the plug consult
!
26
a qualified technician!

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis