Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
8 Putting out of operation
8 Putting out of operation
9 Maintenance and cleaning
EN - 16
NOTICE
• When decommissioning the system, ensure that the procedures for
switching off the welding components are observed.
1 Wait until the shielding gas flow has subsided.
2 Close the shut-off valve for the gas supply.
3 Switch off the power supply.
Scheduled maintenance and cleaning is prerequisite for a long life and a
trouble free operation.
DANGER
Risk of injury due to unexpected start-up.
For the entire duration of maintenance, servicing, dismounting and repair
work, the following instructions must be adhered to:
• Switch off the power supply.
• Close off the compressed air supply.
• Disconnect all electrical connections.
DANGER
Electric shock
Dangerous voltage due to defective cables.
• Check all live cables and connections for proper installation.
• Replace any damaged, deformed or worn parts.
NOTICE
• The maintenance intervals given are approximate values and refer to
single-shift operation.
• Always wear your personal protective clothing when performing
maintenance and cleaning work.
1 Remove adhering welding spatter.
2 Check all screw joints for tight fit.
ABICOR BINZEL offers repair services at the factory.
®
ABIROB
W
Werbung
Inhaltsverzeichnis
