Risk Of Injury - Abicor Binzel ABIROB W300 Betriebsanleitung

®
ABIROB W
9.1 Cleaning the wire guide liner
9.2 Shortening the spiral liner
1 Retaining sleeve
2
Central plug
Fig. 9 Shortening the spiral liner
1 Unscrew the cable assembly on the machine side and bring it into a
stretched position.
2 Unscrew nut and pull out liner.
WARNING

Risk of injury

Serious injuries caused by parts swirling around.
• When cleaning the wire guide with compressed air, wear suitable
protective clothing, in particular safety goggles.
3 Clean wire feed hose from both sides with compressed air.
4 Slide adjusted liner into wire conduit and secure with nut.
NOTICE
• New still unused liners have to be shortened to the actual length of the
cable assembly.
1
6
5
3 Cable assembly
4
Nut
9 Maintenance and cleaning
2 3
4
5
6
Collet chuck
Liner
EN - 17