Abicor Binzel ABIROB W300 Betriebsanleitung Seite 32

6 Putting into operation
®
6.1 ABIROB W Mounting the hose assembly
1 Torch mount
2
4 screws M4x20
Fig. 4 Mounting the ABIROB
EN - 10
1
3 Cable assembly connection
4
Spring
®
W300, W500 hose assembly
1 Unscrew the screws (2) and open the torch mount (1).
2 Insert cable assembly connection (3) into torch mount (1) . Ensure correct
positioning of groove (5) and spring (4).
3 Close torch mount (1) and tighten screws (2) to a max. tightening torque M
of 6 Nm.
2
3
5 4
5 Groove
®
ABIROB W