Items Supplied; Technical Data - Hilti PM 2-LG Original Bedienungsanleitung

3.3 Information displayed during operation
Status
LED doesn't light.
LED shows continuously.
LED quick-flashes.
LED flashes.
The laser beam flashes twice every 10 seconds
(pendulum not locked) or every 2 seconds (pendu-
lum locked).
The laser beam flashes five times and then remains
permanently on.
Laser beam flashes at high frequency.
The laser beam flashes every 2 seconds.
3.4

Items supplied

Line laser, pouch, 4 AA batteries (not in all markets), operating instructions, manufacturer's certificate
4

Technical data

Range of the lines and intersection point without laser receiver
Range, lines and intersection point with laser receiver (depending on am-
bient brightness and receiver position relative to the laser)
Self-leveling time
Self-leveling range (typical)
Accuracy at 10 m (33 ft)
Line width (distance 5 m)
Laser class
Beam divergence, laser lines *180 °
Average output power (max) (p)
Wavelength (λ), ±10 nm
Pulse duration (tp)
Pulse frequency (f)
Power source
Battery life (typical), all lines on
Battery life (typical), only horizontal or vertical lines on
Automatic power-off (activated after)
Operating status indicator
Operating temperature
*2341494*
Meaning
•
•
•
The laser beam is switched on. The tool is in oper-
ation. The batteries are fully charged.
The batteries are almost exhausted.
Tool has switched off automatically, but the pendu-
lum is not locked.
The batteries are almost exhausted.
•
•
The tool cannot level itself.
Inclined line operating mode; the pendulum is
locked, so the lines are not leveled.
2341494
The tool is switched off.
The batteries are exhausted.
The batteries are inserted incorrectly.
Automatic power-off has been deactivated.
Receiver mode has been activated or deacti-
vated.
20 m
(65 ft - 10 in)
2 m ... 50 m
(6 ft - 10 in ... 164 ft)
3 s
±4°
±3 mm
(±0.1 in)
< 2 mm
(< 0.1 in)
Class 2, visible, 510 -
530 nm, ±10 nm (IEC
60825-1:2014); class II
(CFR 21 §1040.10 and
1040.11) (FDA)
0.05 ... 0.08 mrad
< 0.95 mW
510 nm ... 530 nm
< 60 µs
< 12 kHz
4x 1.5V AA battery
at 24 °C (72 °F) : 10 h
at 24 °C (72 °F) : 20 h
1 h
LED and laser beams
−10 ℃ ... 40 ℃
(14 ℉ ... 104 ℉)
English 17