AEG Powertools HS 40 Gebrauchsanleitung Seite 5

Shapes of
hedges
Cutting sequence
ENGLISH
Apply the machine at a right angle to the cutting direction along the hedges. Thick
branches should be cut back with garden pliers
With some training it is possible to remove cut-off branches frome the hedges by
exercising a pendulum cutting action.
A hedge can be cut in any shape, your
personal taste is your limit. The illustrated
trapez shape is only a suggestion.
1.
Cut hedge to desired height.
2.
Cut sides in trapeze shape.
3.
Round upper edgers.
4.
Thin out lower part of hedge.
5
80
100
20
HS 40, HS 50, HS 60, HS 70