Personnel Qualification; Special Hazards - WIKA CPU6000-W Betriebsanleitung

2. Safety
2.2

Personnel qualification

WARNING!
Risk of injury should qualification be insufficient!
Improper handling can result in considerable injury and damage to
equipment.
The activities described in these operating instructions may only be
carried out by skilled personnel who have the qualifications described
below.
Special operating conditions require further appropriate knowledge, e.g. of aggressive
media.
Skilled electrical personnel
Skilled electrical personnel are understood to be personnel who, based on their
technical training, know-how and experience as well as their knowledge of country-
specific regulations, current standards and directives, are capable of carrying out work
on electrical systems and independently recognising and avoiding potential hazards.
The skilled electrical personnel have been specifically trained for the work environment
they are working in and know the relevant standards and regulations.
The skilled electrical personnel must comply with current legal accident prevention
regulations.
2.3

Special hazards

WARNING!
For hazardous media such as oxygen, acetylene, flammable or toxic
gases or liquids, and refrigeration plants, compressors, etc., in addition
to all standard regulations, the appropriate existing codes or regulations
must also be followed.
Residual media on the test item and/or sensors of the CalibratorUnit
can result in a risk to personnel, the environment and equipment. Take
sufficient precautionary measures.
WIKA operating instructions CalibratorUnit, model CPU6000
EN
7