10. Dismounting, return and disposal / 11. Accessories
Information on returns can be found under the heading "Service" on our
local website.
EN
10.3 Disposal
Incorrect disposal can put the environment at risk.
Dispose of instrument components and packaging materials in an environmentally
compatible way and in accordance with the country-specific waste disposal regulations.
This marking on the instruments indicates that they must not be
disposed of in domestic waste. The disposal is carried out by return to
the manufacturer or by the corresponding municipal authorities (see EU
directive 2002/96/EC).
11. Accessories
Calibration
3.1 calibration certificate per DIN EN 10204 (standard)
■
DKD/DAkkS calibration certificate (option)
■
For CPU6000-S
Piston temperature sensor with 1 m cable (standard)
■
Piston temperature sensor with 2.5 m cable
■
Piston temperature sensor with 1 m cable for installation
■
Piston temperature sensor with 2.5 m cable for installation
■
Floating position sensor with 1 m cable, accuracy ±0.5 mm (standard)
■
Floating position sensor with 2.5 m cable, accuracy ±0.5 mm
■
Floating position sensor with 1 m cable, accuracy ±0.5 mm for installation
■
Floating position sensor with 2.5 m cable, accuracy ±0.5 mm for installation
■
Wall mount
■
For CPU6000-W
Temperature-humidity sensor
■
WIKA sensor, 550 ... 1,150 mbar abs., accuracy 0.05 % FS (standard)
■
Mensor sensor, 551 ... 1,172 mbar abs., accuracy 0.01 % of reading
■
Wall mount
■
38
WIKA operating instructions CalibratorUnit, model CPU6000