Setup; Connection Overview - Hoshizaki KM-590DJE-R452 Bedienungsanleitung

ENGLISH
D. Setup
Before operating the icemaker, the bin control
assembly must be installed correctly. Failure to
properly install the assembly could result in ice
backup and unit damage.
1) Follow the storage bin's setup procedure.
2) Position the storage bin in the selected permanent
location.
3) Place the icemaker on top of the storage bin.
4) Secure the icemaker to the storage bin using the 2
mounting brackets and the bolts provided. See Fig. 2.
Bin
5) Install the bin control assembly as follows:
a. Remove the baffle from the storage bin.
b. Remove the thumbscrew and bin control assembly
from inside the icemaker. See Fig. 3.
Bin Control Assembly
Thumbscrew
CAUTION
Bolts
Icemaker
Mounting
Brackets
Fig. 2
Fig. 3
c. Use the thumbscrew removed in the previous step
and the thumbscrew included in the accessory bag
to secure the bin control assembly to the bottom of
the icemaker. See Fig. 4.
d. Remove the bin control cable bracket from inside
the icemaker, then route the bin control cable
through the hole in the bin control bracket and the
hole in the bottom of the icemaker. Route the cable
through the bushing in the bin control cable bracket,
then secure the bracket. Leave as little slack as
possible inside the storage bin. Route the cable
through the wire saddles.
e. Connect the bin control cable connector to wire
harness connector A coming from the control box.
Note:
1. Wire harness has one connector to plug into the
bin control cable and another connector for use if
an upper unit is installed.
2. Wire harness is connected to the control board
red K4 connector.
f. Make sure the bin control cable and wire harness
are secured in the wire saddles and do not interfere
with any components.

Connection Overview

Bin Control Cable Connector/Wire Harness Connector A
Wire Harness Connector B
(for upper unit)
Bin Control Bracket
Bin Control Assembly
Thumbscrews
Connection Detail
Wire Harness Connector
(for upper unit)
Bin Control Cable Connector
Fig. 4
7
Wire Harness
Control Board
Red K4 Connector
Wire Saddle
Bin Control
Cable Bracket
Bin Control Cable
B
Wire Harness
Connector A
Control Board Red
K4 Connector