Herunterladen Inhalt Inhalt Diese Seite drucken

Safety - Ferm MSM1014 Gebrauchsanweisung

Kapp-, gehrungs- und tischkreissäge
Inhaltsverzeichnis

Werbung

Смазка
Станок не нуждается в дополнительной смазке.
Неисправности
В случае неисправности, напр., после износа какой-либо части, обратитесь по адресу
пункта обслуживания, указанному в гарантийном талоне. Покомпонентное
представление изображения частей, которые можете заказать, вы найдете на
последней странице руководства.
Защита окружающей среды
Во избежание транспортных повреждений изделие поставляется в прочной упаковке.
Значительная часть материалов упаковки подлежит утилизации, поэтому просим
передать упаковку в соответствующую специализированную организацию.
Неисправный и/или бракованный электрический или электронный прибор
должен быть утилизирован должным образом.
Г арантия
Для ознакомления с условиями гарантии, прочитайте гарантийный талон на обороте
этой инструкции по эксплуатации.
RU
102
31. Riving knife bolts
32. Flange key
33. Box spanner
34. Dust bag
35. Fuse box

2. SAFETY

Symbols and meanings
The following symbols are used in these instructions for use and on the machine:
CE Conformance with applicable European safety standards
Class II equipment – double insulated – the plug does not need to be earthed
Danger of bodily injury or material damage
Read the instructions
Immediately take the plug out of the socket in the case of damage to the power
cord and during maintenance work
Keep bystanders at a distance
Wear eye and hearing protection
Faulty and/or discarded electrical or electronic apparatus have to be collected at
the appropriate recycling locations.
Specific safety rules for bench circular saws / cross cut saws
The user of the machine must be instructed in the use, adjustment and operation of the
machine.
Make sure of a well-lit and clean and tidy working area.
Never use saw blades that are bent, distorted or in any other way damaged.
Never use saw blades of HSS steel.
Never use saw blades that do not meet the specifications stated in these instructions for use.
Never use adapters to mount saw blades with to large an axle hole.
Never saw any material other than wood, woody material, aluminium and plastics.
Never remove the protective hood. Make sure that the saw blade is correctly protected by
the protective hood.
Ferm
Ferm
UK
07

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Fctm250n

Inhaltsverzeichnis