Finishing Vacuuming - hanseatic VC-PD510-2 Gebrauchsanleitung

Page EN-24 Operation
water tank (15) so that the
water tank (15) bracket (37)
inserts into the recess (38) for
the soft floor nozzle (13) and
then clicks into place.
Attaching the cloth
1. Flip over the water tank (15) so
that the bottom is facing up.
(16)
(39)
2. Attach the cloth (16) to the
water tank so that the blue
surface faces outward and the
white surface is on the roll-
er (39).
Wiping the floor
1. Start vacuuming as described
in section "Vacuuming floors"
on page EN-20.
(36)
2. To start dispensing water,
move the 'Water' button (36) to
the position.
3. To stop dispensing water, re-
turn the 'Water' button (36) to
the position.

Finishing vacuuming

(2)
• Press the On/Off switch (2) to
switch the appliance off.