Product Description And Specifications; Intended Use; Product Features; Technical Data - Bosch GCM 10 J Professional Originalbetriebsanleitung

OBJ_BUCH-1156-002.book Page 22 Friday, December 12, 2014 10:16 AM
22 | English
Symbol Meaning
 Keep hands away from
 Danger area! Keep
Observe the dimensions of
the saw blade. The hole di-
30 mm
ameter must match the tool
spindle without play. Do not
use reducers or adapters.

Product Description and Specifications

Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.

Intended Use

The power tool is intended as a stationary machine for making
straight lengthways and crossways cuts. In this, mitre angles
from –47° to +47° as well as bevel angles from –2° to 47° are
possible.
The capacity of the power tool is designed for sawing hard-
wood, softwood, particle and fibreboard, as well as alumini-
um and plastic.

Product Features

The numbering of the components shown refers to the repre-
sentation of the power tool on the graphic pages.
1 Lever for releasing the tool arm
2 Handle
3 On/Off switch
4 Retracting blade guard
5 Fence
6 Saw table

Technical Data

Mitre Saw
Article number 3 601 M20 ...
Rated power input
Rated voltage
Frequency
No-load speed
Weight according to EPTA-Procedure 01/2003
Protection class
Permissible workpiece dimensions (maximum/minimum) see page 26.
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
1 609 92A 0XH | (12.12.14)
7 Insert plate
8 Locking knob for various mitre angles
9 Mitre detent lever
the cutting area while
10 Mitre angle indicator
the machine is running.
11 Detents for standard mitre angles
Danger of injury when
12 Scale for mitre angle
coming in contact with
13 Mounting holes
the saw blade.
14 Mounting holes for material clamp
15 Recessed handles
hands, fingers or arms
away from this area. 16 Drill holes for extension bars
17 Material clamp
18 Stop screw for 45° bevel angle
19 Bevel lock lever
20 Roller
21 Dust bag
22 Blade guard
23 Transport handle
24 Transport safety-lock
25 Chip ejector
26 Tilt protector
27 Stop screw for 0° bevel angle
28 Hex key (size 6 mm)/cross-head screwdriver
29 Hex socket screws (6 mm) of the fence
30 Holes for tilt protector
31 Fastening screw for metal bar of tilt protector
32 Cross-head screw
33 Spindle lock
34 Hex socket screw (size 6 mm) for mounting of saw blade
35 Clamping flange
36 Saw blade
37 Tool spindle
38 Extension bar
39 Wing bolt
40 Threaded rod
41 Indicator for bevel angle
42 Screws for insert plate
43 Screw for mitre angle indicator
44 Scale for bevel angle
45 Screw for bevel angle indicator
Accessories shown or described are not part of the standard deliv-
ery scope of the product. A complete overview of accessories can
be found in our accessories program.
W
V
Hz
-1
min
kg
... 200 ... 230 ... 260
2000 2000 1600
230 230 110
50/60 50/60 50/60
4500 4500 4500
14.5 14.5 14.5
/II /II
GCM 10 J
... 270
2000
230
50/60
4500
14.5
/II /II
Bosch Power Tools