ATIKA ALA 2500 Originalbetriebsanleitung Seite 17

M a i n t e n a n
M a i n t e n a n
•
Each time before starting maintenance work:
− Switch off the motor and pull out the mains plug.
− Wear protective gloves to prevent injury.
The cutters will not come to a standstill immediately after
cut-off. Before starting any service work wait until all parts
are stationary.
Be sure to have removed any tools from the machine after
completion of service work.
•
Generally garden shredders require little maintenance.
To maintain their efficiency and a long life, observe the
following:
− Keep vent slits clean and free from obstructions.
− Check the locking screws (tighten where necessary).
− Clean the device after shredding.
To clean your product only use a warm moist cloth and a
soft brush.
Model/
name
Year of construction
Motor
Motorrating P S6 - 40 %
1
Rotational speed cutting roller
On/off switch with
Weight
Ecoustic pressure level at work L
(mesured to 2000/14/EG)
Measured level of the acoustic output L
(mesured to 2000/14/EG)
Guaranteed level of the acoustic output L
(mesured to 2000/14/EG)
max. branch diameter
(only for freshly cut wood)
Safety class
Protection class
Mains fuse
Switzerland
UK
c e a n d c l e a n i n g
c e a n d c l e a n i n g
PA
WA
WA
Never use cleaning agents or solvents. Otherwise the de-
vice may be damaged irreversibly. Plastic parts may be
corroded by chemicals.
− Do not clean the machine with running water or high-
pressure cleaners.
− After each operation treat bare metal parts with an envi-
−
ronment-compatible biodegradable spray oil to protect them
against corrosion.
− the cutting roller and shaving plate are expendable parts,
though with normal use and correct adjustment they have a
service life of many years
T e c h n i c a l d a t a
T e c h n i c a l d a t a
ALA 2300
AC-Motor 230 V~, 50 Hz, 2800 min
2300 W
overload protection; cutting and reverse function, zero-voltage initiator
16 A time-lag
10 A time-lag
13 A time-lag
ALA 2500
see last page
-1
2500 W
40 min
-1
24,5 kg
87 dB (A)
K = 3 dB (A)
91 dB (A)
92 dB (A)
∅ max. 40 mm
Ι
IP X4
16 A time-lag
13 A time-lag
--
17