ATIKA ALA 2500 Originalbetriebsanleitung Seite 11

Description
1. Hopper opening for material to be shredded
2. Reset button / motor protection
3. On / Off switch
4. Direction of rotation selector switch
5. Power supply plug
6. Ventilation slots
7. Carriage
8. Ejection slot
A s
A s
8
s e m b l y
s e m b l y
Remove all parts from the
packaging.
Mount each of the two sup-
porting legs with two washers
(No. 8) and self-locking nuts
(No. 2) using the nut wrench
supplied on the housing.
Mount the wheel axle (No. 3)
with the 2 screws M6 x 50 (No.
4), washers and nuts using the
socket wrench and nut wrench
supplied on the carriage.
Push the wheels (No. 5) onto
the axle.
Fasten the wheel cover (No. 6)
in the wheel axle using a
hammer.
11