Hitachi PC-ARFP1E Installations- Und Betriebshandbuch Seite 53

MENU OPERATION
2 Select "Power Saving Mode Setting" by pressing " " or " "
and press "OK".
The "Power Saving Mode Setting" screen will be displayed.
Power Saving Setting
OK
/ ?
OK
/ ?
3 By pressing " "or " ", "Power Saving Mode Setting" will
change between:
Capacity Control ↔ Rotation Control ↔ Intermittent Control
↔ No Setting
Select the power saving mode and press "OK". The setting
confirmation screen will display
Power Saving Mode Setting
OK
/ ?
Sav Mode
OK
/ ?
4 Select "Yes" using "
"or "
The screen will return to normal mode.
Power Saving Mode Setting
OK
/
?
OK
/
?
8.5.1 Power saving mode detailed setting
(outdoor unit capacity control)
This function is used to set the detail of the outdoor unit capacity
control.
• Control Method:
The "Peak Cut Control" reduces the power consumption
range when it exceeds the value of the power setting. On the
basis of the current air conditioning capacity, the "Moderate
Control" is used to moderate the air conditioning capacity as
well as the peak.
• Power Saving LOW (MED / HIGH):
Assign a value corresponding to the capacity control of each
level of the power saving LOW / MED / HIGH.
• Change Level:
It is possible to change the power saving level from the
power save guide.
45 PMML0496 rev.1 - 12/2020
Power saving mode Set
Detailed setting
Sel. OK Entr Rtrn
Capacity Cntl
Control cooling/heating capacity of
outdoor unit.
Adj. OK Entr Rtrn
" and press "OK".
Fix power saving settings.
Cancel current power saving
settings?
Yes No
OK
Sel. Entr Rtrn
?
N O T E
• The "Main/Sub-Remote" display in "9.1 Current Setting" in the "9 Help
Menu" cannot be set if the indication is "Sub" or "−−".
• If the power saving mode changes the power saving detailed setting
in the outdoor unit capacity control, the "Power Saving ON/OFF" will
be OFF.
• It is necessary to assign a value of capacity control as follows: "Sav
LOW" > "Sav MED" > "Sav HIGH".
• The cooling/heating capacity can decrease when using the "Power
Saving" function.
1 Select "Power Saving Setting" from the "Menu" screen and
press "OK".
The "Power Saving Setting" screen will be displayed.
Menu
OK
/ ?
OK
/ ?
2 Select "Detailed Setting" by pressing " " or " " and press
"OK".
The power saving "Detailed Setting" screen will be displayed.
Power Saving Setting
OK
/ ?
OK
/ ?
3 Select "Capacity Control" using " " or " " and press "OK".
The outdoor unit "Capacity Control" screen will be displayed.
Detailed Setting
OK
/
?
Detailed Setting of Capacity Cntl.
OK
/
?
15:10(Fri)
Simple Timer
Reset Filter time sign. 01
Operation Schedule
05
Elevating Grille
Power Saving Setting
SEL. OK ENT. RTN.
Power saving mode Set
Detailed setting
Sel. OK Entr Rtrn
Capacity Control
Rotation Control
Intermittent Control
OK
Sel. Entr Rtrn
/