Hitachi PC-ARFP1E Installations- Und Betriebshandbuch Seite 61

MENU OPERATION
8.10 INDIVIDUAL LOUVER SETTING
8.10.1 Setting
This setting is available only for the indoor unit adopting the
individual louver. Each louver angle can be set individually.
?
N O T E
• This function is available only when the indoor unit corresponds to the
individual louver.
• This function cannot be set when the unit is stopped.
• The fan speed changes to "LOW" while this function is being set.
(After the setting is completed, the unit operation returns to normal).
• As for "Start-up of Heating Operation", "During Defrost Operation" and
"Activation of Thermo-Controller", all the louver angles are fixed at
horizontal position automatically even when this function is activated.
• This function will not be available if two controllers (including a
combination of wired controller + wireless controller) are used.
1 Select "Individual Louver Setting" from the "Menu" and press
"OK".
The "Individual Louver Setting" menu will be displayed.
OK
/ ?
Menu
OK
/ ?
2 Select "Individual Louver Setting" from the "Individual Louver
Setting" menu and press "OK".
Individual Louver Setting
OK
/ ?
Individual Louver Setting
Cancel INDV Louver SET
OK
/ ?
Sel.
?
N O T E
If the number of indoor units connected with the remote control is 1, the
screen passes directly to display the step 4 after this step.
3 Select the indoor unit to change the louver direction by
pressing " ", " ", " " or " ". Press "OK".
Individual Louver Setting
OK
/
?
01-01
01-02
01-03
01-04
OK
/
?
53 PMML0496 rev.1 - 12/2020
15:10(Fri)
Individual Louver Setting
Louver Open/Close
VENTI
Total Heat Exchanger SET
Function 15
Sel. OK Entr Rtrn
OK Entr Rtrn
Select unit to set.
OK
Sel. Entr Rtrn
?
N O T E
The indoor unit displayed on the screen flashes if the individual louver is set.
4 Press " " or " " and select the louver from 1 to 4. The
selected louver is opened and the other louvers are closed.
OK
OK
5 Select the louver angle by pressing " " or " " and press "OK".
OK
03
/
OK
05
The louver angle will be changed as follows.
INDV
?
N O T E
The louver direction without "INDV" complies with the setting of the
normal mode.
6 The confirmation screen will be displayed.
Select "Yes" by pressing " " or " " and press "OK". The
setting is confirmed and the screen will return to the normal
mode.
OK
OK
Individual Louver Setting:01-03
1 2 3
/
?
Adjust air direction & louver angle.
Sel. Adj. OK
/ ?
Individual Louver Setting:01-03
1 2 3
/ ?
Adjust air direction & louver angle.
OK
Sel. Adj.
/
?
INDV INDV INDV INDV INDV
Individual Louver Setting:01-03
/ ?
Fix individual louver setting?
Yes
OK
Sel.
/ ?
4
Entr Rtrn
4
Entr Rtrn
INDV INDV
No
Entr Rtrn